Sunjoe Pressure Washer Model Spx3000 User Manual
- The Sun Joe SPX3000 is part of the Pressure Washer test program at Consumer Reports. In our lab tests, Pressure Washer models like the SPX3000 are rated on multiple criteria, such as those listed.
- Get Sun Joe SPX3000 Use and Care Manual. Get all Sun Joe manuals! Sign up to create an account. Sun Joe Manuals Kitchen Pressure Joe 2030-PSI 1.76-GPM 14.5 Amp Electric Pressure Washer. Don't see a manual you are looking for? Tell us what's missing. Who We Are About Us Company Careers.
- Sun Joe Pressure Washer Spx3000 Troubleshooting
- Sun Joe Spx3000 Pressure Washer
- Sun Joe Spx3000 Problems
15
We have deployed a team of highly experienced professionals, and their strong support makes us able to provide the utmost level of satisfaction to our clients. Being the foremost names of the industry, we are involved in providing an extensive range of 1 KVA Eaton 9145 UPS. We are well-supported by highly skilled vendors who possess rich industry experience. IndiaMART Member Since Jun 2014Ultimate Power Solution is wholesaling UPS (On-line and Off-line), BATTERIES( S.M.F,Automotive and Tubular),SERVO STABILIZER (Hi-Rel), PHOTOCOPIER (Kyocera- Make), INVERTOR (APC / Su-Kam), PRINTERS(H.P), BIOMETRIC SOLUTIONS and SOLAR Systems.
SPX3000 Form No. SJ-SPX3000-880E 1. User must keep all bystanders at least 15 m away. Double insulation. Sound power level is 96 dB(A). Keep out of rain and away from wet areas. Know Your Pressure Washer 4 Read the owner’s manual and safety rules carefully before operating the pressure washer. The Sun Joe SPX3000 is an electric power washer with an impressive list of features - 120V/1800 Watt/14.5 amp motor, 2030 PSI, 1,76 GPM, CU score: 3573. We’ve covered all this in our detailed review.
Troubleshooting
• Disconnect the unit from the electrical power supply before carrying out maintenance on the machine or when checking that
Get Sun Joe SPX3000 Use and Care Manual. Get all Sun Joe manuals! Sign up to create an account. Sun Joe Manuals Kitchen Pressure Joe 2030-PSI 1.76-GPM 14.5 Amp Electric Pressure Washer. Operate the washer with non-corrosive/non-toxic.
its parts are in proper working order.
• To avoid unnecessary hassles, consult the following table before contacting customer service with any mechanical issues.
Problems
Possible Cause
Possible Solution
Machine refuses
to start
• Power failure/machine not
plugged into a working receptacle.
• Defective socket.
• Fuse has blown.
• Defective extension cord.
• Check to make sure machine is plugged into
a working outlet.
• Check the power cord and reset the GFCI.
Try a different outlet.
• Replace fuse. Switch off any other machines
that are using the same circuit.
• Try the unit without an extension cord.
• Check the hoses and connections are airtight.
• Clean or replace valves/seals.
• Please call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
• Replace fuse. Switch off other machines using
the same circuit.
• Check that the mains voltage corresponds to
specification on the model tag.
• Leave the washer for 5 minutes to cool down.
• Clean the nozzle.
• Install a fuse with a higher amp rating than the
amp consumption of the machine. Try the unit
without an extension cord.
• Allow machine to run by holding the trigger until
regular working pressure resumes.
• Check that the water supply corresponds to the
specifications required.
• WARNING! Avoid using long, thin hoses
(minimum 1/2 in. diameter).
• Clean the nozzle.
• Clean the water inlet filter.
• Straighten out the hose to remove any kinks/blockages.
• Please call Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
• Wait for pump/hoses or accessories to thaw.
• Connect inlet water.
• Clean the water inlet filter.
• Clean the nozzle.
• Pump sucking air.
• Valves dirty, worn out, or stuck.
• Pump seals worn out.
• Fuse has blown.
• Incorrect mains voltage.
• Thermal sensor activated.
• Nozzle partially blocked.
• Fuse too small.
• Air in inlet hose.
• Inadequate supply of mains water.
• Nozzle partially blocked.
• Water filter blocked.
• Hose kinked.
• Pump/spray gun is leaking.
• Trigger mechanism is broken.
• Pump/hoses or accessories frozen.
• No water supply.
• Water inlet filter blocked.
• Nozzle blocked.
Fluctuating pressure
Machine stops
Fuse blows
Image 5 of 5Schwinn 430 image: The pedals are oversized.Editor's Note: This review has been removed from our side-by-side comparison because it no longer ranks as a top 10 product. Schwinn 430 elliptical trainer user manual.
Machine pulsating
Machine often starts
and stops by itself
Machine starts, but
no water comes out